Australia’s second largest telecommunications company, owned
by overseas Singapore Telecommunications, that also supplies services to MVNO
(Mobile Virtual Network Operators), like Virgin Mobile, Boost or Woolworths/Safeway just to name a few,
is failing to provide an internet service to its users.
Telecoms companies have been able to get away for many years
with loose definitions of what an internet connection speed is deemed as
acceptable, with the help of the governing bodies.
The telcos are also responsible for providing false
information to users, when there are known faults within their networks. There
is also no urgency or policy for authorities to clean up this fraudulent
behaviour by the telcos.
Many of the older generation of Information Technology
professionals would be too familiar with the tern Viatel, and its speed. Viatel has a speed of 1200/75 (bits per second)
or 150/9.3 bytes per second (download/upload).
Once line quality and technology started to improve, the
masses were treated to 2400 baud (bps) modems, and 9600 baud fax/modems, I.T
professionals would have sighed in relief that the old Viatel day were over, or
were they?
Come the year 2012 and Australian telcos are not only slow
to implement new technology, but also disregard the need of their customers.
Wireless Internet or Mobile Broadband is on the increase
with Australian consumers, and telcos are deliberately slow to upgrade
facilities (to maximise profits) providing substandard or in breach of service
providing, internet speeds.
Hardware manufacturers are pushing their new (speedy) products
to telcos, with no real advantage to the end user.
Wired Broadband can come in many flavours in the forms for
ADSL, ADSL2+ or Cable with the expected speeds of 8Mbps, 24Mbps or 100Mbps
respectively.
When it comes to wireless devices such as phones, tethered
smartphones, or dedicated wireless (wifi) routers, even though the technology protocols
are precisely defined, as in wired, performance of the devices is a bit murky.
The general populous are misled that the purchase of the lasted
and greatest pocket wifi device ( for example ) currently from Vodafone the
Pocket Wifi Pro, which may be capable of a theoretical maximum of 21Mps
(analogous to ADSL2+ speeds) is only capable of delivering 0.512-3.5Mbps, because
of the limitations of the telcos towers. An older generation pocket wifi device
would still be sufficient enough, but this does not turn the ‘economy’.
Many telcos state that with their Mobile Broadband or Wireless
Internet, although speeds may vary according to conditions, the typical speeds
a user can expect are that of 512-2400kbs.
Not so with Optus.
Surveys have been taken across various east coast cities of
Australia, and some ‘typical’ results are shown via the pictured illustrations,
using a performance monitoring tool.
Speed tests for the following server sites are:
Adelaide – Ping: 1539ms, D’load: 2kbps,
Melbourne – Ping: 123ms, D’load 109kbps, U’load: 228kbps
Sydney – Ping: 403ms, D’load: 47kbps, U’load 35kbps
In real terms the latency ping figures of 403 and 1539
milliseconds are too high to have real usage of the internet connection.
In this example, Melbourne’s figure may be good for weather
synchronisation, or information from a text version of a news portal may be
downloadable.
There are many factors to consider when taking into account
wireless connection of devices to towers, amongst others, signal strength,
distance and allocated tower bandwidth.
What the general populous may not be aware is the fact that
Optus have oversold their network, also limiting the speeds to MVNO’s and
powering down towers at night to save on operating costs.
There should be a national inquiry to the substandard
operation of one of the most important communications medium in a first world
country like Australia.
Since many millions of dollars annually are extruded from
the pockets of the masses, and it’s a service that the masses are being
effected by, no inquiry will ever take place against the telco industry.
No comments:
Post a Comment